DQSV · Transmitters & encoders
Pressure Sensor
Pressure measurement for process equipment and pipework. Specify the range, medium, connection and required output for a configuration review.
Technical specifications
| SKU | EP-100-0001 |
|---|---|
| Ordering model | PT600 |
| Product form | Pressure transmitter with conditioned output |
| Pressure type | Gauge / absolute, selectable |
| Measuring range | 0–100 kPa to 0–40 MPa, selectable |
| Maximum measurement error | 0.5 FS–0.02 FS |
| Output signal | 4–20 mA / RS485 / 0.5–5 V, selectable or customizable |
| Power supply | 5–30 V DC |
| Process connection | G 1/2 B male thread |
| Wetted / application media | Gas, liquid, oil and corrosive liquids; customizable |
| Overpressure | 2 × range upper limit |
| Ambient / medium temperature | −40 to +60 °C (T6 condition) |
| Ingress protection | IP66/IP67, depending on connection |
| Electrical connection | 1/2 NPT conduit connection, potted cable lead |
| Explosion-proof marking | Ex |
Specify the measurement point
Pressure measurement starts with the actual operating conditions. Share the minimum, normal and maximum pressure, the process medium, and whether the reading is gauge or absolute pressure.
Details to send
- Pressure range and any short pressure peaks
- Medium, process temperature and wetted-material requirements
- Process connection and available installation space
- Required electrical output, power supply and cable connection
- Any hazardous-area requirement and the applicable certification documents
Request the final datasheet and drawing with your inquiry. Ratings, output options and certification depend on the selected configuration.